CUSTOMIZE LANE DEPARTURE ALERT SYSTEM
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Tech Tips
The following items can be customized.
Customizing with the Multi-information display
Turn the power switch on (IG).
Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup
Select the setting by referring to the table below.
Change the settings of the lane departure alert system using the steering pad switch assembly.
Tech Tips
Each item is displayed on the "Setting" screen on the multi-information display.
| Display | Content | Setting | Default |
|---|---|---|---|
| Steering Assist | Steering control function | On/Off | On |
| Warning Sensitivity | Timing of lane departure alert | High/Standard | Standard |
| Vehicle Sway Warning | Vehicle sway warning function | On/Off | On |
| Sway Sensitivity | Sway warning sensitivity | High/Standard/Low | Standard |