FRONT WIPER RUBBER REMOVAL

PROCEDURE


  1. REMOVE FRONT WIPER BLADE


    1. A003NZ2C02
      *a Lock Button
      B006IR6 Push
      B006IFV Remove in this Direction

      Push the lock button of the front wiper blade to release the lock.

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Place a piece of cloth between the front wiper arm and windshield glass to avoid damaging the windshield glass.

  2. REMOVE WIPER RUBBER

    Tech Tips

    The wiper rubber can be removed from either end of the front wiper blade.


    1. Pull the wiper rubber as indicated by the arrows, in the order shown in the illustration, until its end is aligned with the slits in the front wiper blade.

      A003OHRC02
      *a Slit - -
    2. A003MW6C01
      *a Slit
      *b Shield Cap
      B006IFV Remove in this Direction

      Pull the end of the wiper rubber through the slits in the front wiper blade in the direction indicated by the arrow shown in the illustration and remove the wiper rubber.

      Note

      Make sure not to remove the shield caps. If a shield cap is removed, the wiper rubber may separate from the front wiper blade while driving.