ALIGNMENT / HANDLING DIAGNOSIS SERVICE DATA

Vehicle Height (Unloaded Vehicle)

Front A - B

Rear C - D

115 mm (4.53 in.)

96 mm (3.78 in.)*A

51 mm (2.01 in.)

31 mm (1.22 in.)*A

*A: for Rough Road Area Specification Vehicles

Measurement Points:

B: Ground clearance of front lower No. 1 suspension arm sub-assembly x front suspension crossmember sub-assembly set bolt center

D: Ground clearance of rear No. 2 suspension arm assembly x rear suspension member sub-assembly set bolt center

Camber (Unloaded Vehicle)

Camber Inclination

Right-left Difference

Front

-0°10' +/- 0°45' (-0.17° +/- 0.75°)

0°03' +/- 0°45' (0.05° +/- 0.75°)*A

0°45' (0.75°) or less

Rear

-1°07' +/- 0°45' (-1.12° +/- 0.75°)

-0°48' +/- 0°45' (-0.80° +/- 0.75°)*A

0°45' (0.75°) or less

*A: for Rough Road Area Specification Vehicles

Caster (Unloaded Vehicle)

Caster Inclination

Right-left Difference

7°07' +/- 0°45' (7.12° +/- 0.75°)

6°49' +/- 0°45' (6.82° +/- 0.75°)*A

0°45' (0.75°) or less

*A: for Rough Road Area Specification Vehicles

Steering Axis Inclination (Unloaded Vehicle)

Steering Axis Inclination Reference

13°19' (13.32°)

12°52' (12.87°)*A

*A: for Rough Road Area Specification Vehicles

Toe-in (Unloaded Vehicle)

*A: for Rough Road Area Specification Vehicles

Wheel Turning Angle (Unloaded Vehicle)

Inside Wheel

Outside Wheel

41°43' +/- 2°00' (41.72° +/- 2.00°)

42°28' +/- 2°00' (42.47° +/- 2.00°)*A

34°42' (34.70°)

35°04' (35.07°)*A

*A: for Rough Road Area Specification Vehicles