HV BATTERY HEATER INSTALLATION

PROCEDURE

1. INSTALL HV BATTERY HEATER SUB-ASSEMBLY

   CAUTION:

   Be sure to wear insulated gloves and protective goggles.

   
   

   1. Engage the 5 clamps to install the HV battery heater sub-assembly.

   2. Install the 20 clips.

2. INSTALL NO. 5 HV SUPPLY STACK SUB-ASSEMBLY

   Click here

3. INSTALL NO. 4 HV SUPPLY STACK SUB-ASSEMBLY

   Click here

4. INSTALL NO. 3 HV SUPPLY STACK SUB-ASSEMBLY

   Click here

5. INSTALL NO. 2 HV SUPPLY STACK SUB-ASSEMBLY

   Click here

6. INSTALL NO. 1 HV SUPPLY STACK SUB-ASSEMBLY

   Click here

7. INSTALL NO. 1 HV BATTERY SHIELD REINFORCEMENT

   Click here

8. INSTALL NO. 7 HYBRID BATTERY INTAKE DUCT

   Click here

9. INSTALL NO. 1 HV BATTERY PROTECTOR

   Click here

10. INSTALL NO. 1 HYBRID BATTERY PACK WIRE

    Click here

11. INSTALL NO. 1 HV BATTERY HOSE

    Click here

12. INSTALL NO. 4 HYBRID BATTERY INTAKE DUCT

    Click here

13. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT

    Click here

14. INSTALL NO. 2 BATTERY FRAME

    Click here

15. INSTALL NO. 1 BATTERY FRAME

    Click here

16. CONNECT WIRE HARNESS

    Click here

17. INSTALL HV BATTERY HEATER RELAY

    CAUTION:

    Be sure to wear insulated gloves and protective goggles.

    
    

    1. Install the HV battery heater relay to the HV battery with the nut.

       Torque:

       7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the HV battery heater relay connector.

18. INSTALL HYBRID BATTERY TERMINAL BLOCK

    Click here

19. INSTALL BATTERY ECU ASSEMBLY

    Click here

20. INSTALL HV BATTERY JUNCTION BLOCK ASSEMBLY

    Click here