BATTERY BLOWER INSTALLATION

PROCEDURE

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY (for LH Side)

   
   

   1. Install the battery cooling blower assembly with the 3 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the battery cooling blower assembly connector.

2. INSTALL BATTERY COOLING BLOWER ASSEMBLY (for RH Side)

   
   

   1. Install the battery cooling blower assembly with the 3 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the battery cooling blower assembly connector.

3. INSTALL NO. 2 HYBRID BATTERY INTAKE DUCT (for LH Side)

   
   

   1. Install the No. 2 hybrid battery intake duct with the 2 clips.

4. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT (for LH Side)

   
   

   1. Install the No. 1 hybrid battery intake duct with the 2 clips.

5. INSTALL NO. 2 HYBRID BATTERY INTAKE DUCT (for RH Side)

   
   

   1. Install the No. 2 hybrid battery intake duct with the 2 clips.

6. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT (for RH Side)

   
   

   1. Install the No. 1 hybrid battery intake duct with the 2 clips.

7. INSTALL NO. 3 HYBRID BATTERY INTAKE DUCT (for LH Side)

   
   

   1. Install the No. 3 hybrid battery intake duct with the 3 clips.

8. INSTALL NO. 3 HYBRID BATTERY INTAKE DUCT (for RH Side)

   
   

   1. Install the No. 3 hybrid battery intake duct with the 3 clips.

9. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

10. INSTALL TONNEAU COVER HOOK A (for LH Side with Toyota Safety Sense)

    Click here

11. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (for LH Side with Toyota Safety Sense)

    Click here

12. INSTALL NO. 2 ROPE HOOK (for LH Side without Toyota Safety Sense)

    Click here

13. INSTALL ROPE HOOK (for LH Side without Toyota Safety Sense)

    Click here

14. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

15. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

16. INSTALL REAR UNDER SIDE COVER LH

    Click here

17. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

18. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

19. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

20. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

21. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

22. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

23. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

24. INSTALL TONNEAU COVER HOOK A (for RH Side with Toyota Safety Sense)

    Click here

25. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (for RH Side with Toyota Safety Sense)

    Click here

26. INSTALL NO. 2 ROPE HOOK (for RH Side without Toyota Safety Sense)

    Click here

27. INSTALL ROPE HOOK (for RH Side without Toyota Safety Sense)

    Click here

28. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

29. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY RH

    Click here

30. INSTALL REAR UNDER SIDE COVER RH

    Click here

31. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

32. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

33. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

34. INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Click here

35. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

36. INSTALL REAR SEATBACK HINGE COVER

    Click here

37. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

    Click here

38. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

    Click here

39. INSTALL REAR DECK TRIM COVER

    Click here

40. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

41. INSTALL DECK FLOOR BOX LH

    Click here

42. INSTALL DECK FLOOR BOX RH

    Click here

43. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

44. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

45. INSTALL REAR NO. 4 FLOOR BOARD

    Click here

46. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

47. INSTALL TONNEAU COVER ASSEMBLY

    Click here