COMBINATION SWITCH(for Charging Timer Switch) REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

   Click here

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

   Click here

3. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

4. REMOVE COWL SIDE TRIM BOARD LH

   Click here

5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click here

8. REMOVE FUEL CONTROL SWITCH

   
   

   1. 

      Disengage the 2 claws and remove the fuel control switch from the lower instrument panel finish panel assembly.