ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Hybrid Control / Data List / Accelerator Position Sensor No.1 Voltage %, Accelerator Position Sensor No.2 Voltage %.

      
      Powertrain > Hybrid Control > Data List

      Tester Display
      Accelerator Position Sensor No.1 Voltage %
      Accelerator Position Sensor No.2 Voltage %

   5. Read the Data List.

      Result

      Tester Display Accelerator Pedal Condition Specified Condition Accelerator Position Sensor No.1 Voltage % Not depressed 10 to 22% Fully depressed 52 to 90% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively Accelerator Position Sensor No.2 Voltage % Not depressed 24 to 40% Fully depressed 68 to 99% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively