INVERTER BATTERY INSTALLATION

PROCEDURE

1. INSTALL INVERTER BATTERY

   
   

   1. Temporarily install the inverter battery with the 2 bolts.

   2. 

      Fully tighten the 2 bolts in the order shown in the illustration.

      Torque:

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

   3. Engage the 2 clamps.

   4. Connect the inverter battery connector.

2. INSTALL REAR CONSOLE BOX ASSEMBLY (w/o Solar Charging System)

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here