PLUG-IN CHARGE CONTROL SYSTEM Charging Stops during Plug-in Charging

PROCEDURE


  1. CHECK DTC OUTPUT (HEALTH CHECK)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Health Check.

    5. Check DTCs.

      Result
      Result Proceed to
      No DTCs are output. A
      DTCs are output. B

    6. Turn the power switch off.


    B

    GO TO DTC CHART

    A

  2. CHECK FOR VEHICLE CONTROL HISTORY


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Plug-in Control / Utility / Vehicle Control History.


      Powertrain > Plug-in Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    5. Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History.


      Powertrain > Hybrid Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    6. Check for Vehicle Control History.

      Result
      Result Proceed to
      Vehicle Control History not stored A
      Vehicle Control History stored B

    7. Turn the power switch off.


    B

    GO TO VEHICLE CONTROL HISTORY PLUG-IN CHARGE CONTROL SYSTEM Click here HYBRID CONTROL SYSTEM Click here

    A

  3. CHECK PLUG-IN CHARGE STATE (USING A KNOWN GOOD ELECTRIC VEHICLE CHARGER CABLE ASSEMBLY)

    Note


    • Make sure to use a known good AC power source.

    • Make sure to use a known good electric vehicle charger cable assembly.

    • Use the same 110 to 240 V power that the customer used to plug-in charge the vehicle.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Health Check.

    5. Clear DTCs.

    6. Enter the following menus: Powertrain / Plug-in Control / Utility / Vehicle Control History.


      Powertrain > Plug-in Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    7. Clear all Vehicle Control History items.

    8. Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History.


      Powertrain > Hybrid Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    9. Clear all Vehicle Control History items.

    10. Enter the following menus: Powertrain / Hybrid Control / Data List / Hybrid Battery SOC.


      Powertrain > Hybrid Control > Data List
      Tester Display
      Hybrid Battery SOC

    11. According to the display on the GTS, read the Data List and confirm that the SOC of the HV battery is less than 70%.

      Tech Tips

      If the SOC of the HV battery is 70% or more, drive the vehicle in EV mode to discharge the HV battery until the SOC becomes less than 70%.


      Powertrain > Hybrid Control > Data List
      Tester Display Measurement Item Range Normal Condition
      Hybrid Battery SOC Hybrid Battery SOC 0.00 to 100.00% 0.00 to 100.00%: Always

    12. Turn the power switch off.

    13. Turn the Charge Now on.

      Tech Tips


      • If no charge schedule has been registered, the above step is not necessary.

      • Setting Charge Now to ON:

        - Push the timer charging switch (fuel control switch).

        - Using the steering pad switches, select "Charge Now" on the Timer Charging Charge Schedule screen of the multi-information display.

    14. Connect a known good electric vehicle charger cable assembly to the vehicle and perform plug-in charging.

    15. Turn the power switch on (IG).

    16. Enter the following menus: Health Check.

    17. Check DTCs.

    18. Enter the following menus: Powertrain / Plug-in Control / Utility / Vehicle Control History.


      Powertrain > Plug-in Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    19. Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History.


      Powertrain > Hybrid Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    20. Check for Vehicle Control History.

    21. Turn the power switch off.

    22. Disconnect the electric vehicle charger cable assembly.

      Result
      Result Proceed to
      DTCs output A
      Vehicle Control History stored B

      DTCs and Vehicle Control History not stored

      (Electric vehicle charger cable assembly provided with the vehicle (w/ CCID) was used when malfunction occurred)

      		 C

      DTCs and Vehicle Control History not stored

      (Electric vehicle charger cable assembly provided with the vehicle (w/o CCID) was used when malfunction occurred)

      		 D

      DTCs and Vehicle Control History not stored and plug-in charging suspended

      (Charging station or electric vehicle charger cable assembly other than one provided with the vehicle was used when malfunction occurred)

      		 E

      DTCs and Vehicle Control History not stored and plug-in charging not suspended

      (Charging station or electric vehicle charger cable assembly other than one provided with the vehicle was used when malfunction occurred)

      		 F

    A

    GO TO DTC CHART

    B

    GO TO VEHICLE CONTROL HISTORY PLUG-IN CHARGE CONTROL SYSTEM Click here HYBRID CONTROL SYSTEM Click here

    D

    GO TO ELECTRIC VEHICLE CHARGER CABLE ASSEMBLY INSPECTION Click here

    E

    Analyze the cause according to the following table. Inspect auxiliary battery Click here Control pilot signal circuit Click here Take appropriate action in accordance with the result of the cause analysis.

    F

    CAUSE ANALYSIS (ENVIRONMENT/USER RELATED CAUSE) Perform cause analysis in the order of "Environment" and "User" categories as specified in the following tables. Interview customer and provide instruction on usage. Click here Explain to the customer that if a power outage occurs or a breaker is tripped, charging will be suspended. Interview customer and check the charging station. Click here It is possible that plug-in charging was suspended due to a power management function or charging control function of the charging station, or due to a compatibility problem. Check with the manufacturer of the charging station for details. Interview customer and provide instruction on usage. Click here Explain to the customer that if the charging connector is disconnected during plug-in charging, charging will be suspended and "Charging Stopped Connect Plug to Charge" will be displayed on the multi-information display the next time the power switch is turned on (IG). Explain to the customer that if the charging cable is disconnected from the electrical outlet during plug-in charging, charging will be suspended and " Charging Stopped Check Charging Source" will be displayed on the multi-information display the next time the power switch is turned on (IG). Take appropriate action in accordance with the result of the cause analysis.

    C

  4. CHECK PLUG-IN CHARGE STATE (USING THE ELECTRIC VEHICLE CHARGER CABLE ASSEMBLY PROVIDED WITH THE VEHICLE (W/ CCID))

    Note


    • Plug-in charge the vehicle using a known good electric vehicle charger cable assembly.

    • Plug-in charge the vehicle using the electric vehicle charger cable assembly provided with the vehicle.

    • Use the same 110 to 240 V power that the customer used to plug-in charge the vehicle.


    1. Perform plug-in charging using the electric vehicle charger cable assembly that was provided with the vehicle (w/ CCID) until the HV battery is fully charged.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Powertrain / Plug-in Control / Utility / Vehicle Control History.


      Powertrain > Plug-in Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    6. Enter the following menus: Powertrain / Hybrid Control / Utility / Vehicle Control History.


      Powertrain > Hybrid Control > Utility
      Tester Display
      Vehicle Control History (RoB)

    7. Check for Vehicle Control History.

    8. Disconnect the electric vehicle charger cable assembly.

    9. Turn the power switch off.

      Result
      Result Proceed to
      Vehicle Control History stored A
      Vehicle Control History not stored and plug-in charging suspended B
      Vehicle Control History not stored and plug-in charging not suspended C

    A

    GO TO VEHICLE CONTROL HISTORY PLUG-IN CHARGE CONTROL SYSTEM Click here HYBRID CONTROL SYSTEM Click here

    B

    Analyze the cause according to the following table. Inspect auxiliary battery Click here Control pilot signal circuit Click here Inspect electric vehicle charger cable assembly Click here
    Click here Take appropriate action in accordance with the result of the cause analysis.

    C

    CAUSE ANALYSIS (ENVIRONMENT/USER RELATED CAUSE) Perform cause analysis in the order of "Environment" and "User" categories as specified in the following tables. Interview customer and provide instruction on usage. Click here Explain to the customer that if a power outage occurs or a breaker is tripped, charging will be suspended. Interview customer and check the charging station. Click here It is possible that plug-in charging was suspended due to a power management function or charging control function of the charging station, or due to a compatibility problem. Check with the manufacturer of the charging station for details. Interview customer and provide instruction on usage. Click here Explain to the customer that if the charging connector is disconnected during plug-in charging, charging will be suspended and "Charging Stopped Connect Plug to Charge" will be displayed on the multi-information display the next time the power switch is turned on (IG). Explain to the customer that if the charging cable is disconnected from the electrical outlet during plug-in charging, charging will be suspended and "Charging Stopped Check Charging Source" will be displayed on the multi-information display the next time the power switch is turned on (IG). Take appropriate action in accordance with the result of the cause analysis.