PLUG-IN CHARGE CONTROL SYSTEM, Diagnostic DTC:P060649, P060B49, P0E5E49, P0E5E87, P1C1F49, P1CED1C, P1CF01C, P1CF31C, P319414

DTC Code DTC Name
P060649 Plug-in Control Module Internal Electronic Failure
P060B49 Plug-in Control Module A/D Processing Internal Electronic Failure
P0E5E49 Hybrid/EV Battery Charger Control Module Internal Electronic Failure
P0E5E87 Plug-in Control Module Processor from Hybrid/EV Battery Charger Control Module Processor Missing Message
P1C1F49 Hybrid/EV Battery Charger Control Module A/D Processing Internal Electronic Failure
P1CED1C Plug-in Control ECU Power Supply (+12.5V) Circuit Voltage Out of Range
P1CF01C Plug-in Control ECU Power Supply (-7.5V) Circuit Voltage Out of Range
P1CF31C Plug-in Control ECU Power Supply (+1.15V) Circuit Voltage Out of Range
P319414 Internal Control Module Circuit Short to Ground or Open

DESCRIPTION

The charge control ECU built into the electric vehicle charger assembly monitors its internal operation. If it detects a malfunction, it stores a DTC. If these DTCs are output, replace the electric vehicle charger assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P060649 Plug-in Control Module Internal Electronic Failure

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Main CPU ALU arithmetic program error)

(1 trip detection logic)

Electric vehicle charger assembly Does not come on

Master Warning Light:

Comes on

P060B49 Plug-in Control Module A/D Processing Internal Electronic Failure

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Main CPU AD timeout error)

(1 trip detection logic)

Electric vehicle charger assembly Comes on

Master Warning Light:

Comes on

P0E5E49 Hybrid/EV Battery Charger Control Module Internal Electronic Failure

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Sub CPU ALU arithmetic program error)

(1 trip detection logic)

Electric vehicle charger assembly Does not come on

Master Warning Light:

Comes on

P0E5E87 Plug-in Control Module Processor from Hybrid/EV Battery Charger Control Module Processor Missing Message

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Communication error (sub to main CPU))

(1 trip detection logic)

Electric vehicle charger assembly Comes on

Master Warning Light:

Comes on

P1C1F49 Hybrid/EV Battery Charger Control Module A/D Processing Internal Electronic Failure

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Sub CPU AD timeout error)

(1 trip detection logic)

Electric vehicle charger assembly Comes on

Master Warning Light:

Comes on

P1CED1C Plug-in Control ECU Power Supply (+12.5V) Circuit Voltage Out of Range

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Current sensor or voltage sensor (direct current high voltage circuit) abnormal supply voltage)

(1 trip detection logic)

Electric vehicle charger assembly Does not come on

Master Warning Light:

Comes on

P1CF01C Plug-in Control ECU Power Supply (-7.5V) Circuit Voltage Out of Range

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Voltage sensor (direct current high voltage circuit) abnormal supply voltage)

(1 trip detection logic)

Electric vehicle charger assembly Does not come on

Master Warning Light:

Comes on

P1CF31C Plug-in Control ECU Power Supply (+1.15V) Circuit Voltage Out of Range

Electric vehicle charger assembly (charge control ECU) internal malfunction

(Current sensor (alternating current high voltage circuit) power source malfunction)

(1 trip detection logic)

Electric vehicle charger assembly Does not come on

Master Warning Light:

Comes on

P319414 Internal Control Module Circuit Short to Ground or Open

Electric vehicle charger assembly (charge control ECU) internal malfunction

(ECU power source malfunction)

(1 trip detection logic)

Electric vehicle charger assembly Does not come on

Master Warning Light:

Comes on

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here

P060649, P060B49:


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. With power switch on (IG) and wait for 5 seconds or more.

  7. Enter the following menus: Powertrain / Plug-in Control / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.

P0E5E49, P0E5E87, P1C1F49, P1CED1C, P1CF01C, P1CF31C:


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Enter the following menus: Powertrain / Hybrid Control / Data List.

  5. Check that "Hybrid Battery SOC" shows 70% or less.

  6. Turn the power switch off and wait for 2 minutes or more.

  7. Connect the electric vehicle charger cable assembly, and plug-in charge the vehicle for 30 seconds or more.

  8. Disconnect the electric vehicle charger cable assembly and wait for 10 seconds or more.

  9. Turn the power switch on (IG) and turn the GTS on.

  10. Enter the following menus: Powertrain / Plug-in Control / Utility / All Readiness.

  11. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.

P319414:


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. Drive the vehicle at 5 km/h (3 mph) or more.

  7. Enter the following menus: Powertrain / Plug-in Control / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.

PROCEDURE


  1. REPLACE ELECTRIC VEHICLE CHARGER ASSEMBLY

    Click here

    Result
    Proceed to
    NEXT

    NEXT