PLUG-IN CHARGE CONTROL SYSTEM UTILITY


  1. ALL READINESS

    Tech Tips


    • With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.

    • You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Clear the DTCs even if no DTCs are stored.


      Powertrain > Plug-in Control > Clear DTCs

    5. Turn the power switch off and wait for 2 minutes or more.

    6. Turn the power switch on (IG).

    7. Perform the DTC judgment driving pattern to run the DTC judgment.

    8. Enter the following menus: Powertrain / Plug-in Control / Utility / All Readiness.


      Powertrain > Plug-in Control > Utility
      Tester Display
      All Readiness

    9. Input the DTCs to be confirmed.

    10. Check the DTC judgment result.

      GTS Display Description
      Normal

      • DTC judgment completed

      • System normal
      Abnormal

      • DTC judgment completed

      • System abnormal
      Incomplete

      • DTC judgment not completed

      • Perform the driving pattern
      N/A

      • Unable to perform DTC judgment

      • Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit

      • Perform the driving pattern

      If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.

    11. Turn the power switch off.

  2. VEHICLE CONTROL HISTORY


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Plug-in Control / Utility / Vehicle Control History.


      Powertrain > Plug-in Control > Utility
      Tester Display
      Vehicle Control History (RoB)

      Click here

    5. Turn the power switch off.