PLUG-IN CHARGE CONTROL SYSTEM, Diagnostic DTC:P062F44

DTC Code DTC Name
P062F44 Plug-in Control Module EEPROM Data Memory Failure

DESCRIPTION

The charge control ECU built into the electric vehicle charger assembly monitors its internal operation. If it detects a malfunction, it stores a DTC. If these DTCs are output, replace the electric vehicle charger assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P062F44 Plug-in Control Module EEPROM Data Memory Failure

Electric vehicle charger assembly (charge control ECU) internal malfunction

(EEPROM error)

(1 trip detection logic)

 Electric vehicle charger assembly Comes on

Master Warning Light:

Does not come on

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. With power switch on (IG) and wait for 5 seconds or more.

  7. Enter the following menus: Powertrain / Plug-in Control / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.

PROCEDURE


  1. REPLACE ELECTRIC VEHICLE CHARGER ASSEMBLY

    Click here

    Result
    Proceed to
    NEXT

    NEXT

    COMPLETED