ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR (w/o Canister Pump Module)


    1. Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.

    2. Install the No. 2 engine coolant temperature sensor to the No. 2 water by-pass pipe with the clip.

      Note


      • If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.

      • If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.

      • Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.

    3. Connect the No. 2 engine coolant temperature sensor connector.

    4. Install the inverter with converter assembly.

      Click here

    5. Add engine coolant (for Engine).

      Click here

  2. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.



    1. Install a new gasket to the engine coolant temperature sensor.

    2. A003K4BN01

      Using SST, install the engine coolant temperature sensor to the water outlet.

      SST
      09817-33191

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

      Torque:
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

    3. Connect the engine coolant temperature sensor connector.

    4. Install the EGR valve assembly.

      Click here

  3. INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR (w/ Canister Pump Module)


    1. Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.

    2. Install the No. 2 engine coolant temperature sensor to the radiator pipe with the clip.

      Note


      • If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.

      • If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.

      • Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.

    3. Connect the No. 2 engine coolant temperature sensor connector.

    4. Install the No. 1 engine cover sub-assembly.

      Click here

    5. Add engine coolant (for Engine).

      Click here

  4. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.