SFI SYSTEM(w/o Canister Pump Module), Diagnostic DTC:U019B87

DTC Code DTC Name
U019B87 Lost Communication with Battery Charger Control Module Missing Message

MONITOR DESCRIPTION

The ECM and electric vehicle charger assembly send and receive signals via CAN communication.

If a communication error occurs between the ECM and electric vehicle charger assembly, the ECM illuminates the MIL and stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
U019B87 Lost Communication with Battery Charger Control Module Missing Message

All of the following conditions are met for 10.6 seconds or more (1 trip detection logic):


  • Power switch on (IG)

  • Auxiliary battery voltage is 10 V or higher

  • No communication between ECM and electric vehicle charger assembly

  • CAN communication system

  • Electric vehicle charger assembly

  • ECM

 Comes on DTC stored SAE Code: U019B

MONITOR STRATEGY

Required Sensors/Components ECM
Frequency of Operation Continuous

CONFIRMATION DRIVING PATTERN


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the GTS on.

  4. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  5. Turn the power switch off and wait for at least 30 seconds.

  6. Turn the power switch on (IG).

  7. Turn the GTS on.

  8. Wait 11 seconds or more.

  9. Enter the following menus: Powertrain / Engine / Trouble Codes.

  10. Read the pending DTCs.

    Tech Tips


    • If a pending DTC is output, the system is malfunctioning.

    • If a pending DTC is not output, perform the following procedure.

  11. Enter the following menus: Powertrain / Engine / Utility / All Readiness.

  12. Input the DTC: U019B87.

  13. Check the DTC judgment result.

    GTS Display Description
    NORMAL

    • DTC judgment completed

    • System normal
    ABNORMAL

    • DTC judgment completed

    • System abnormal
    INCOMPLETE

    • DTC judgment not completed

    • Perform driving pattern after confirming DTC enabling conditions
    N/A

    • Unable to perform DTC judgment

    • Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit

    Tech Tips


    • If the judgment result is NORMAL, the system is normal.

    • If the judgment result is ABNORMAL, the system is malfunctioning.

CAUTION / NOTICE / HINT

Tech Tips

Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.

PROCEDURE


  1. GO TO CAN COMMUNICATION SYSTEM


    1. Refer to the CAN Communication System.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END