WHEN USING GTS
CAUTION:
Observe the following items for safety reasons:
Before using the GTS, read the instruction manual.
Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
When driving the vehicle for testing purposes using the GTS, 2 persons are required. One to drive the vehicle, and another to operate the GTS.
INITIALIZATION
Note
Perform Registration (VIN registration or frame number registration) when replacing the ECM.
Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.
Perform "Grill Shutter Control Mode Switching and Grill Shutter Initialization" after replacing the swing grille actuator assembly or radiator shutter sub-assembly.
When the cable is disconnected from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Lane Departure Alert System (w/ Steering Control) | |
| Intelligent Clearance Sonar System | |
| Parking Assist Monitor System | |
| Simple Intelligent Parking Assist System | |
| Power Door Lock Control System | |
| Pre-crash Safety System | |
| Adaptive High Beam System |
PRECAUTIONS FOR INSPECTING HYBRID CONTROL SYSTEM
Refer to Hybrid Control System.
NOTICE FOR HYBRID CONTROL SYSTEM ACTIVATION
Refer to Hybrid Control System.
PRECAUTION WHEN REPLACING BATTERY ECU ASSEMBLY AND ECM
Refer to Hybrid Control System.