FRONT PILLAR UPPER COVER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT PILLAR UPPER COVER SUB-ASSEMBLY


    1. A01MI18C01
      B006JFV Install in this Direction

      Engage the clips to install the front pillar upper cover as shown in the illustration.

    2. Install the 4 screws.

    3. Remove the protective tape.

  2. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY


    1. A01MG5SC01
      B006JFV Install in this Direction (1)
      B006JHL Install in this Direction (2)

      Engage the guides to install the front fender top reinforcement sub-assembly as shown in the illustration.

    2. Engage the clips as shown in the illustration.

    3. Engage the clip A.