ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A01MHXTC02
      B000ZUW Protective Tape

      Apply protective tape around the center roof drip side finish moulding.

    2. A01MGLH

      Disengage the roof drip side finish moulding clips to remove the center roof drip side finish moulding.

      Note


      • Do not remove the roof drip side finish moulding clip.

      • If the roof drip side finish moulding clip is damaged or falls out, replace it with a new one.