ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Engage the clips to install the body rocker panel moulding assembly.

      A01MJJH

    2. Install the 8 clips.

    3. Install the screw.

      Tech Tips

      Use the same procedure for the front and rear sides.

    4. Using a hexagon socket wrench 4, install the screw.

    5. Install the grommet.

    6. Install the screw.

    7. Using a hexagon socket wrench 4, install the 2 screws.

    8. Remove the protective tape.

  2. INSTALL ROCKER PANEL MOULDING COVER (for Rear Side)


    1. A01MI2C

      Engage the claws to install the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front and rear sides.

  3. INSTALL FRONT FLOOR COVER RH

    Click here

  4. INSTALL FRONT FLOOR COVER LH

    Click here

  5. INSTALL NO. 2 MOTOR UNDER COVER

    Click here

  6. INSTALL REAR WHEEL HOUSE FRONT PLATE

    Click here