FRONT DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY


    1. Engage the claws to install the front door belt moulding assembly as shown in the illustration.

      A01MHUPC02
      B006JFV Install in this Direction - -

    2. Remove the protective tape.

  2. INSTALL FRONT DOOR FIX WINDOW GLASS

    Click here

  3. INSTALL FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY

    Click here

  4. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    Click here

  5. INSTALL FRONT DOOR GLASS RUN

    Click here

  6. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  7. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click here

  8. INSTALL FRONT DOOR GLASS INNER WEATHERSTRIP

    Click here

  9. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

    Click here

  10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  11. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  12. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  13. INSPECT POWER WINDOW OPERATION

    Click here