NAME PLATE REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM

   
   

   1. Remove the luggage compartment door cover.

   2. Remove the luggage compartment door lock cylinder assembly.

   3. Remove the luggage compartment door outside garnish sub-assembly.

   4. Remove the luggage compartment door outside garnish.

   5. Install the luggage compartment door outside garnish.

   6. 

      *a	Wooden Block
      *b	Piano Wire
      *c	Location Pin
      	Protective Tape

      Apply protective tape around the luggage compartment door emblem.

   7. Using an infrared light, heat the luggage compartment door emblem.

      Heating Temperature
      Item Temperature Luggage Compartment Door Emblem 40 to 60°C (104 to 140°F) 3 to 5 minutes

      
      

      1. Insert a piano wire between the vehicle body and luggage compartment door emblem.

   8. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   9. Pull the piano wire and cut the double-sided tape that holds the luggage compartment door emblem to the vehicle body.

      Note

      Be careful of the location pin positions.

      
      

      1. Remove the luggage compartment door emblem.

   10. Remove the protective tape.

   11. Install the rear light assembly LH

   12. Install the rear light assembly RH

   13. Install the luggage compartment door outside garnish subassembly.

   14. Install the luggage compartment door lock cylinder assembly.

   15. Install the luggage compartment door cover.

2. REMOVE BACK DOOR NAME PLATE

   
   
   1. 

      *a	Wooden Block
      *b	Piano Wire
      	Protective Tape

      Apply protective tape around the back door name plate.

   2. 

      *a	Heated Part
      *b	Infrared Light

      Using an infrared light, heat the back door name plate.

      Heating Temperature
      Item Temperature Back Door Name Plate 40 to 60°C (104 to 140°F) 3 to 5 minutes

      CAUTION:

      
      

      • Do not touch the infrared light and heated parts.

      • Touching the infrared light may result in burns.

      • Touching heated parts for a long time may result in burns.

   3. Insert a piano wire between the vehicle body and back door name plate.

   4. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   5. Pull the piano wire and cut the double-sided tape that holds the back door name plate to the vehicle body.

   6. Remove the back door name plate.

   7. Remove the protective tape.

3. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

   
   
   1. 

      *a	Wooden Block
      *b	Piano Wire
      	Protective Tape

      Apply protective tape around the No. 2 luggage compartment door name plate.

   2. Using an infrared light, heat the No. 2 luggage compartment door name plate.

      Heating Temperature
      Item Temperature No. 2 Luggage Compartment Door Name Plate 40 to 60°C (104 to 140°F) 3 to 5 minutes

      
      

      1. Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

   3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   4. Pull the piano wire and cut the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

      
      

      1. Remove the No. 2 luggage compartment door name plate.

   5. Remove the protective tape.

4. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE

   
   
   1. 

      *a	Wooden Block
      *b	Piano Wire
      	Protective Tape

      Apply protective tape around the No. 3 luggage compartment door name plate.

   2. Using an infrared light, heat the No. 3 luggage compartment door name plate.

      Heating Temperature
      Item Temperature No. 3 Luggage Compartment Door Name Plate 40 to 60°C (104 to 140°F) 3 to 5 minutes

      
      

      1. Insert a piano wire between the vehicle body and No. 3 luggage compartment door name plate.

   3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   4. Pull the piano wire and cut the double-sided tape that holds the No. 3 luggage compartment door name plate to the vehicle body.

      
      

      1. Remove the No. 3 luggage compartment door name plate.

   5. Remove the protective tape.

5. REMOVE SIDE PANEL EMBLEM

   
   
   1. 

      *a	Wooden Block
      *b	Piano Wire
      *c	Location Pin
      	Protective Tape

      Apply protective tape around the side panel emblem.

   2. Using an infrared light, heat the side panel emblem.

      Heating Temperature
      Item Temperature Side Panel Emblem 40 to 60°C (104 to 140°F) 3 to 5 minutes

      
      

      1. Insert a piano wire between the vehicle body and side panel emblem.

   3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

   4. Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.

      Note

      Be careful of the location pin positions.

      
      

      1. Remove the side panel emblem.

   5. Remove the protective tape.