FRONT BUMPER REASSEMBLY

PROCEDURE


  1. INSTALL LOWER FRONT BUMPER ABSORBER


    1. A01MI7V

      Engage the claws and install the lower front bumper absorber with the 3 clips and 8 bolts.

  2. INSTALL FRONT BUMPER BRACKET LH


    1. A01MI09

      Engage the guides.

    2. Install the front bumper bracket LH with the 2 screws.

  3. INSTALL FRONT BUMPER BRACKET RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL FRONT BUMPER SIDE SUPPORT LH


    1. A01MIPKC02
      B006JFV Install in this Direction

      Engage the guide and claws to install the front bumper side support LH as shown in the illustration.

      Tech Tips

      Do not forcibly engage the clip.

    2. A01MFYU

      Engage the clip as shown in the illustration.

    3. Install the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  5. INSTALL FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A01MHMX

      Engage the hook to install the front side member bracket sub-assembly LH.

    2. Install the 4 bolts.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  7. INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. Install the front bumper reinforcement sub-assembly with the 6 bolts.

      Torque:
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }
      A01MH1D

    2. Engage the clamps to install the motor compartment main wire.

  9. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. Engage the guides to install the front bumper energy absorber as shown in the illustration.

      A01MIUMC01
      B006JFV Install in this Direction - -

  10. INSTALL RADIATOR GRILLE BRACKET


    1. A01MGIQ

      Install the radiator grille bracket with the 3 bolts.

    2. Install the 2 clips.

  11. INSTALL FRONT BUMPER HOLE COVER LH


    1. A01MFV5

      Engage the hook.

    2. A01MHXHC01
      B006JFV Install in this Direction

      Engage the claws to install the front bumper holecover LH as shown in the illustration.

  12. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. INSTALL FRONT FENDER LINER RETAINER


    1. A01MIE4

      Engage the claws to install the 2 front fender liner retainers.

      Tech Tips

      Use the same procedure for the RH and LH sides.

  14. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A01MGU3C01
      B006JFV Install in this Direction

      Engage the claws to install the front bumper extension mounting bracket as shown in the illustration.

    2. Install the 2 screws.

  15. INSTALL LOWER RADIATOR GRILLE SUB-ASSEMBLY


    1. Engage the guides and claws to install the lower radiator grille sub-assembly.

      A01MIE2

    2. Install the 2 outside moulding retainers.

    3. Install the 2 screws.

  16. INSTALL FRONT BUMPER SIDE MOULDING LH


    1. A01MJ1IC02
      B006JFV Install in this Direction

      Engage the guides and claws to install the front bumper side moulding LH as shown in the illustration.

    2. Install the 2 screws.

  17. INSTALL FRONT BUMPER SIDE MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. INSTALL LOWER RADIATOR SIDE GRILLE LH


    1. A01MG6C

      Engage the claws to install the lower radiator side grille LH.

    2. Install the 2 screws.

  19. INSTALL LOWER RADIATOR SIDE GRILLE RH

    Tech Tips

    Use the same procedure as for the LH side.

  20. INSTALL NO. 3 MOTOR COMPONENT WIRE


    1. A01MIHQC04
      *A for LH Side
      *B for RH Side

      Engage the clamps to install the 2 No. 3 motor compartment wires.

  21. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    Click here

  22. INSTALL NO. 1 ULTRASONIC SENSOR

    Click here

  23. INSTALL CLEARANCE LIGHT ASSEMBLY LH

    Click here

  24. INSTALL CLEARANCE LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY


    1. A01MJD5

      Engage the guides and claws to install the radiator grille emblem assembly.

    2. Install the 2 screws.

  26. INSTALL RADIATOR GRILLE SUB-ASSEMBLY


    1. Engage the claws to install the radiator grille sub-assembly.

      A01MI1P

  27. INSTALL HOOD TO RADIATOR GRILLE SEAL


    1. Using a piece of cloth, rub off any double-side tape that remains on the radiator grille sub-assembly.

      Note


      • Installing the hood to radiator grille seal while old double-sided tape remains can cause adhesion failure.

      • Using a screwdriver or similar tool to remove the old tape can damage the surface and cause adhesion failure.

    2. Using a non-residue solvent, clean the attachment surface.

    3. Engage the clips in order starting with the center clip to installe the hood to radiator grill seal.

    4. Remove the peeling paper on a new hood to radiator grille seal.

    5. Apply double-sided tape to both ends of the hood to radiator grille seal.

      Note

      Make sure to apply sufficient pressure to the portions with double-sided tape at both ends of the hood to radiator grille seal to ensure the tape is securely adhered.

      A01MFVE