FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE HOOD TO RADIATOR GRILLE SEAL


    1. Remove the double-sided tape from both ends of the hood to radiator grille seal, and disengage the clips as shown in the illustration to remove the hood to radiator grille seal.

      A01MHAZC02
      B000ZUW Double-sided Tape - -
      B006JFV Remove in this Direction - -

  2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. Disengage the claws to remove the radiator grille sub-assembly.

      A01MI1P

  3. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    1. A01MJD5

      Remove the 2 screws.

    2. Disengage the claws and guides to remove the radiator grille emblem assembly.

  4. REMOVE CLEARANCE LIGHT ASSEMBLY LH

    Click here

  5. REMOVE CLEARANCE LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. REMOVE NO. 1 ULTRASONIC SENSOR

    Click here

  7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Click here

  8. REMOVE NO. 3 MOTOR COMPONENT WIRE


    1. A01MIHQC03
      *A for LH Side
      *B for RH Side

      Disengage the clamps to remove the 2 No. 3 motor compartment wires.

  9. REMOVE LOWER RADIATOR SIDE GRILLE LH


    1. A01MG6C

      Remove the 2 screws.

    2. Disengage the claws to remove the lower radiator side grille LH.

  10. REMOVE LOWER RADIATOR SIDE GRILLE RH

    Tech Tips

    Use the same procedure as for the LH side.

  11. REMOVE FRONT BUMPER SIDE MOULDING LH


    1. A01MJG6C02
      B006JFV Remove in this Direction

      Remove the 2 screws.

    2. Disengage the claws and guides to remove the front bumper side moulding LH as shown in the illustration.

  12. REMOVE FRONT BUMPER SIDE MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY


    1. Remove the 2 screws.

      A01MIE2

    2. Remove the 2 outside moulding retainers.

    3. Disengage the claws and guides to remove the lower radiator grille sub-assembly.

  14. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A01MFTGC01
      B006JFV Remove in this Direction

      Remove the 2 screws.

    2. Disengage the claws to remove the front bumper extension mounting bracket as shown in the illustration.

  15. REMOVE FRONT FENDER LINER RETAINER


    1. A01MIE4

      Disengage the claws to remove the 2 front fender liner retainers.

      Tech Tips

      Use the same procedure for the RH and LH sides.

  16. REMOVE FRONT BUMPER HOLE COVER LH


    1. A01MH3QC02
      B006JFV Remove in this Direction

      Disengage the claws as shown in the illustration.

    2. A01MFV5C01

      Disengage the hook to remove the front bumper hole cover LH.

  17. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. REMOVE RADIATOR GRILLE BRACKET


    1. A01MGIQ

      Remove the 2 clips.

    2. Remove the 3 bolts and radiator grille bracket.

  19. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. Disengage the guides to remove the front bumper energy absorber as shown in the illustration.

      A01MJFTC01
      B006JFV Remove in this Direction - -

  20. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. Using a clip remover, disengage the clamps to separate the motor compartment main wire.

      A01MH1DC01

    2. Remove the 6 bolts and front bumper reinforcement sub-assembly.

  21. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A01MHMX

      Remove the 4 bolts.

    2. Disengage the hook to remove the front side member bracket sub-assembly LH.

  22. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  23. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A01MICSC02
      B006JEG Turn

      Remove the bolt.

    2. Using a screwdriver, disengage the clip as shown in the illustration.

      Tech Tips

      The clip cannot be completely removed.

    3. A01MFIHC02
      B006JFV Remove in this Direction

      Using a clip remover, disengage the claws and guide to remove the front bumper side support LH.

  24. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. REMOVE FRONT BUMPER BRACKET LH


    1. Remove the 2 screws.

    2. A01MI09

      Disengage the guides to remove the front bumper bracket LH.

  26. REMOVE FRONT BUMPER BRACKET RH

    Tech Tips

    Use the same procedure as for the LH side.

  27. REMOVE LOWER FRONT BUMPER ABSORBER


    1. A01MGZQC03
      B006JEG Push

      Remove the 8 bolts and 3 clips.

    2. Using a screwdriver, disengage the claws to remove the lower front bumper absorber.