HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY


    1. A01MG4J

      Engage the hook to install the rear height control sensor sub-assembly.

    2. Install the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      If the rear height control sensor has been dropped, replace it with a new one.

    3. Connect the connector.

  2. INSTALL NO. 1 FLOOR UNDER COVER

    Click here

  3. INSTALL NO. 2 FLOOR UNDER COVER

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  6. PERFORM INITIALIZATION

    Click here

  7. ADJUST HEADLIGHT AIMING

    Click here