HIGH MOUNTED STOP LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT CENTER STOP LIGHT SET


    1. A01MIL7C23
      *a

      Component without harness connected

      (Center Stop Light Set)

      Apply auxiliary battery voltage to the center stop light set and check that the light comes on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 2 (E)

      		 Center stop light comes on

      Tech Tips

      If the result is not as specified, replace the center stop light set.