CLEARANCE LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT CLEARANCE LIGHT ASSEMBLY LH


    1. A01MI8PC02
      *a

      Component without harness connected

      (Clearance Light Assembly LH)

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 2 (E)

      		 Front turn signal light LH comes on

      Tech Tips

      If the result is not as specified, replace the clearance light assembly LH.

  2. INSPECT CLEARANCE LIGHT ASSEMBLY RH


    1. A01MI8PC03
      *a

      Component without harness connected

      (Clearance Light Assembly RH)

      Apply auxiliary battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1 (B)

      Auxiliary battery negative (-) → Terminal 2 (E)

      		 Front turn signal light RH comes on

      Tech Tips

      If the result is not as specified, replace the clearance light assembly RH.