HEADLIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. A01MGE9

      Install a new headlight leveling motor base packing.

  2. INSTALL HEADLIGHT LEVELING MOTOR


    1. A01MI02C01
      *a Aiming Screw

      Set the tip of the aiming screw of the headlight leveling motor onto the headlight unit assembly.

    2. A01MILDC01
      *a Aiming Screw
      B006JEG Tighten

      Tighten the aiming screw of the headlight leveling motor the same number of rotations recorded when removing it to connect the headlight leveling motor.

    3. A01MJKPC01
      B006JEG Turn
      B006JFV Install in this Direction

      Turn the headlight leveling motor clockwise to install it as shown in the illustration.

      Tech Tips

      For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.

    4. A01MGKEC01
      *a Aiming Screw
      B006JEG Tighten

      Tighten the aiming screw 20 rotations.

    5. A01MFNG

      Connect the connector.

  3. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY

    Click here

  4. INSTALL FRONT BUMPER BRACKET


    1. A01MIJE

      Engage the guides to install the front bumper bracket.

    2. Install the 2 screws.