LIGHTING SYSTEM OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


    1. Turn the power switch on (IG).

    2. Turn the headlight dimmer switch to the AUTO position.

    3. Cover the automatic light control sensor.

    4. Check that the taillights and low beam headlights come on.

    5. Uncover the automatic light control sensor.

    6. Check that the low beam headlights and taillights turn off.

  2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (for Door-linked Light Auto Turn-off System)


    1. Prepare the vehicle so that the power switch on (IG) and the driver door is closed.

    2. Set the headlight dimmer switch to the tail, head or AUTO position to illuminate the lights.

    3. Turn the power switch off and open the driver door. Check that the headlights, rear fog light, taillights, clearance lights and license plate lights turn off.

  3. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (except Door-linked Light Auto Turn-off System)


    1. When headlight dimmer switch in AUTO position.


      1. Turn the power switch on (IG).

      2. Turn the headlights, rear fog light, clearance lights, taillights or license plate lights on.

      3. Turn the power switch off.

      4. Check that all of lights go off immediately.

    2. When headlight dimmer switch in tail or head position.


      1. Turn the power switch on (IG).

      2. Turn the headlights, rear fog light, clearance lights, taillights or license plate lights on.

      3. Turn the power switch off.

      4. Check that the headlights go off immediately.

  4. DAYTIME RUNNING LIGHT SYSTEM


    1. Headlight dimmer switch is in the off or AUTO position (and the low beam headlights are not turned on via the automatic light control system).

    2. READY condition is received.

    3. Release the parking brake.

    4. Check that the daytime running lights come on.