WASHER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. A01MGMYC04
      *a

      Component without harness connected

      (Windshield Washer Motor and Pump Assembly)

      With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.

    2. Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 1

      Auxiliary battery negative (-) → Terminal 2

      		 Washer fluid is pumped

      If the result is not as specified, replace the windshield washer motor and pump assembly.