WIPER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01MFZVC01
      B006JFV Install in this Direction

      Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

    2. Connect the 2 connectors.

  2. INSTALL UPPER STEERING COLUMN COVER


    1. A01MI22

      Engage the guides and claw to install the upper steering column cover.

    2. A01MI44

      Engage the clips and guides to install the meter hood spacer to the upper steering column cover.

  3. INSTALL LOWER STEERING COLUMN COVER


    1. A01MFMF

      Engage the guides and claws to install the lower steering column cover.

    2. Install the screw.

    3. Turn the steering wheel assembly to the right and install the screw.

    4. Turn the steering wheel assembly to the left and install the screw.

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  6. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS

    Click here