FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FUEL LID WITH MOTOR LOCK ASSEMBLY


    1. A01MH6L

      Engage the claw to install the fuel lid with motor lock assembly.

    2. Connect the connector.

    3. Engage the clamp.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. Install the luggage compartment trim cover assembly LH with the 3 screws.

  3. INSTALL ROPE HOOK


    1. A01MI53

      Engage the claws to install the rope hook.

  4. INSTALL REAR FLOOR FINISH PLATE


    1. A01MGXWC02
      B006JFV Install in this Direction

      Engage the clips to install the rear floor finish plate as shown in the illustration.

    2. Install the clips.

  5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. Install the front luggage compartment trim cover with the 6 clips.

  6. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01MHOTC02
      B006JFV Install in this Direction

      Install the No. 2 luggage compartment trim hook.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.