FUEL LID OPENER MOTOR ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. A01MJMO

      Remove the luggage compartment floor mat.

  2. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  3. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01MGXSC02
      B006JFV Remove in this Direction

      Remove the No. 2 luggage compartment trim hook.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  4. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A01MI2U

      Using a clip remover, remove the 6 clips and front luggage compartment trim cover.

  5. REMOVE REAR FLOOR FINISH PLATE


    1. A01MHLVC02
      B006JDZ Place Hands Here
      B006JFV Remove in this Direction

      Using a clip remover, remove the clips.

    2. Disengage the clips to remove the rear floor finish plate as shown in the illustration.

  6. REMOVE ROPE HOOK


    1. A01MI53

      Disengage the claws to remove the rope hook.

  7. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A01MG9G

      Using a clip remover, disengage the clips to remove the luggage compartment trim cover assembly LH.

  8. REMOVE FUEL LID WITH MOTOR LOCK ASSEMBLY


    1. A01MH6L

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector.

    3. Disengage the claw to remove the fuel lid with motor lock assembly.