FUEL LID OPENER UNIT DISASSEMBLY

PROCEDURE


  1. REMOVE FUEL FILLER OPENING LID SWITCH SUB-ASSEMBLY


    1. A01MFKF

      Remove the 2 screws.

    2. Disengage the guides to remove the fuel filler opening lid switch sub-assembly.

  2. REMOVE PUSH START SWITCH BRACKET


    1. A01MGK0C02
      B006JFV Remove in this Direction

      Disengage the claws to remove the push start switch bracket as shown in the illustration.

  3. REMOVE FUEL FILLER OPENING LID ASSEMBLY


    1. A01MJDGC02
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a thin-bladed screwdriver with its tip wrapped in protective tape, disengage the claw and guides to remove the fuel filler opening lid assembly.