LUGGAGE ELECTRICAL KEY SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY


    1. A01MGXCC03
      *a

      Component without harness connected

      (Luggage Compartment Door Opening Switch Assembly)
      *b Open Switch

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 Switch off (Not pressed) 10 kΩ or higher
        Switch on (Pressed) Below 1 Ω

        • If the result is not as specified, replace the luggage compartment door opening switch assembly.