FRONT DOOR OPENING TRIM WEATHERSTRIP INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A01MGV3C01
      *a Paint Mark
      *b Mark Position

      Align the point mark on the front door opening trim weatherstrip with the mark position on the vehicle and install the front door opening trim weatherstrip as shown in the illustration.

      Paint Mark
      Location Color
      RH Side White
      LH Side Yellow

      Note


      • Always align the paint mark when installing the port. If the paint mark position is out of place, coolant leaks may occur.

      • After installation, check that the correctly.

      Tech Tips

      To easily install the weatherstrip strip, first install the area with the paint mark as shown in the illustration. Then install the part to ward the corners and push any excess length into the corners.

  2. INSTALL COWL SIDE TRIM BOARD

    Click here

  3. INSTALL FRONT DOOR SCUFF PLATE

    Click here

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here