HOOD SUPPORT DISPOSAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. DISPOSE OF HOOD SUPPORT ASSEMBLY

    Note

    Make sure the piston rods are in the fully extended stake before performing work.


    1. Secure the hood support assembly horizontally in a vise with the piston rod pulled out.

    2. A01MFV7C09

      Wearing safety glasses, gradually cut a part between A and B shown in the illustration to discharge the gas inside.

      Area Measurement
      A - B 150 mm (5.906 in.)

      CAUTION:

      Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

      A01MGYV

      Tech Tips

      The gas is colorless, odorless and non-poisonous.