HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearancemeasure ments of areas "a" though "f" are within each standard range.

      A01MJ7UE01
      Standard Clearance
      Area Measurement Area Measurement
      A 2.1 to 5.1 mm (0.083 to 0.201 in.) B 2.5 to 5.5 mm (0.098 to 0.217 in.)
      C 2.5 to 5.5 mm (0.098 to 0.217 in.) - -