POWER WINDOW SWITCH(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH side.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  2. REMOVE REAR DOOR ARMREST COVER

    Click here

  3. REMOVE NO. 1 REAR DOOR STIFFENER CUSHION

    Click here

  4. REMOVE COURTESY LIGHT ASSEMBLY

    Click here

  5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  6. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01MIAJ

      Disconnect the connector.

    2. A01MIDAC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw.

    3. A01MJBBC01
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the rear power window regulator switch assembly as shown in the illustration.