POWER WINDOW SWITCH(for Front Side) REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG RH

    Tech Tips

    Use the same procedure for the LH side.

    Click here

  2. REMOVE FRONT DOOR ARMREST COVER RH

    Tech Tips

    Use the same procedure for the LH side.

    Click here

  3. REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION

    Tech Tips

    Use the same procedure for the LH side.

    Click here

  4. REMOVE COURTESY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for the LH side.

  5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side.

    Click here

  6. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01MGX6

      Disconnect the connector.

    2. A01MIJ0C01
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw.

    3. A01MJWKC01
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the power window regulator switch assembly as shown in the illustration.