POWER WINDOW MASTER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. Install the multiplex network master switch assembly with the 3 screws.

    2. A01MIZFC01
      B006JFV Install in this Direction

      Engage the guide as shown in the illustration.

    3. Install the he front door armrest base panel assembly LH with the 8 screws.

    4. A01MJNUC01
      *1 Door Trim Upper Panel Assembly LH
      B006JEG Raise Up
      B006JDZ Place Hands Here

      As shown in the illustration, slightly raise up the door trim upper panel assembly LH.

      Tech Tips

      Raise up the door trim upper panel assembly LH far enough that the front door pull handle LH can be installed.

    5. A01MJNTC01
      B006JFV Install in this Direction

      Install the front pull handle LH as shown in the illustration.

    6. Install the 7 screws.

    7. Connect the 2 connectors.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  4. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION

    Click here

  5. INSTALL FRONT DOOR ARMREST COVER LH

    Click here

  6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here