POWER WINDOW MASTER SWITCH INSPECTION

PROCEDURE


  1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. Check that the LED illuminates.


      1. A01MH7GC01
        *a LED Illumination
        *b

        Component without harness connected

        (Multiplex Network Master Switch Assembly)

        Apply battery voltage to the multiplex network master switch assembly and check that the LED illuminates.

        Specified Condition
        Tester Connection (Terminal Markings) Specified Condition

        Auxiliary battery positive → 3(ILL+)

        Auxiliary battery negative → 13(ILL-)

        		 LED illuminates

        Tech Tips

        If the result is not as specified, replace the multiplex network master switch assembly.