POWER WINDOW MASTER SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  2. REMOVE FRONT DOOR ARMREST COVER LH

    Click here

  3. REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION

    Click here

  4. REMOVE COURTESY LIGHT ASSEMBLY

    Click here

  5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  6. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A01MHMH

      Disconnect the 2 connectors.

    2. A01MJZL

      Remove the 7 screws.

    3. A01MFZFC01
      *1 Door Trim Upper Panel Assembly LH
      B006JEG Raise Up
      B006JDZ Place Hands Here

      As shown in the illustration, slightly raise up the door trim upper panel assembly LH.

      Tech Tips

      Raise up the door trim upper panel assembly LH far enough that the front door pull handle LH can be removed.

    4. A01MJFVC01
      B006JFV Remove in this Direction

      Remove the front pull handle LH as shown in the illustration.

    5. A01MFTY

      Remove the 8 screws.

    6. A01MGOQC01
      B006JFV Remove in this Direction

      Disengage the guide to remove the front door armrest base panel assembly LH.

    7. A01MK2Z

      Remove the 3 screws and multiplex network master switch assembly.