AIR CONDITIONING PANEL REMOVAL

PROCEDURE


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01MJ9PC01
      *a Protective Tape

      Install the protective tape.

    2. A01MI5DC01
      B006JDZ Place Hands Here
      B006JFV Remove in this Direction

      Pull in the direction shown by the arrows in the illustration to disengage the clips and raise up the integration control and panel assembly.

      Note

      To avoid damaging the integration control and panel assembly or breaking the clips, do not lift up the integration control and panel assembly too much.

    3. A01MJ7FC01
      B006JFV Remove in this Direction

      Pull in the direction shown by the arrows in the illustration, disengage the claws, and disconnect the integration control and panel assembly.

    4. A01MHAQC01
      *a Guide
      *b Clamp

      Disengage the clamps and guide.

    5. Disconnect the 2 connectors to remove the integration control and panel assembly.