WATER TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL NO. 2 COOLER THERMISTOR

   
   
   1. 

      *1	Cooler NO.2 Thermistor
      *2	Heater Packing
      *a	39.0 mm (1.535 in.) (from rear end)
      *b	Heater Packing Bonding Position

      As shown in the illustration install a new No. 2 cooler thermistor with a new heater packing.

2. INSTALL NO. 2 COOLER THERMISTOR HARNESS

   
   

   1. Connect the connector.

   2. Install the No. 2 cooler thermistor harness and ground wire with the screw.

3. INSTALL NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

   Click here

4. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY

   Click here