CONDENSER REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. 

      *a

      MODULATOR

      Using pliers, install a new cooler dryer to the modulator.

   2. 

      Apply sufficient compressor oil to the O-ring.

      Compressor Oil
      ND-OIL 12 or equivalent

      Note

      Keep the O-rings and O-ring fitting surfaces free of foreign matter.

   3. 

      Using a 14 mm hexagon socket wrench, install the cap to the modulator.

      Torque:

      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }