REFRIGERANT LINE REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE PIPING CLAMP


    1. A01MFWJC03
      *1 No. 2 Air conditioner Tube and Accessory Assembly
      *2 Air conditioner Tube and Accessory Assembly

      Install SST to the piping clamp as shown in the illustration.

      SST
      09870-00025
    2. A01MG85C05
      B006JEG Push In

      Hold the air conditioner tube and accessory assembly and No. 2 air conditioner tube and accessory assembly with each hand and push in SST with both thumbs.

      Note

      Do not apply excessive force to the air conditioner tube and No. 2 air conditioner tube and accessory assembly as they may bend.

    3. A01MFWXC06
      *1 Air conditioner Tube and Accessory Assembly
      *a Stopper
      B006JEG Lift Up
      B006JKV Pull Off

      Raise the stopper of SST and remove SST and the piping clamp together from the air conditioner tube and accessory assembly.

    4. Remove the piping clamp from SST.

    5. Remove the air conditioner tube and accessory assembly from the No. 2 air conditioner tube and accessory assembly.

    6. Remove the 2 O-rings from the No. 2 air conditioner tube and accessory assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.