AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS


  1. 1. CUSTOMIZE AIR CONDITIONING SYSTEM


    1. Customizing with the GTS

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the GTS.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Air Conditioner.

      5. Select the setting by referring to the table below.


        Air Conditioner
        Tester Display Description Default Setting ECU
        Set Temperature Shift Function to perform control with the shifted temperature versus the displayed temperature Normal 00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C Air Conditioning Amplifier Assembly
        Air Inlet Mode Function to change the mode automatically to RECIRCULATION mode in cases when the air conditioning is turned on to cool the cabin down quickly Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
        Foot/DEF Auto Mode Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
        Foot/DEF Automatic Blow Up Function Function to increase the blower level automatically when the defroster is ON ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
        Ambient Temperature Shift Function to control with the shifted ambient temperature against the display ambient temperature Normal 0000001:-3C,0000010:-2C,0000100:-1C,0001000:Normal,0010000:+1C,0100000:+2C,1000000:+3C Air Conditioning Amplifier Assembly
        Button Press Buzzer Function to sound a buzzer when a button is pressed ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
        ECO MODE Cancel Function to cancel the ECO mode drive when item is ON OFF 0:OFF,1:ON Air Conditioning Amplifier Assembly
        Noise and Vibration Reduction Function to change the speed of the compressor when the item is set to ON OFF 0:OFF,1:ON Air Conditioning Amplifier Assembly
        Refrigerant Shortage Check Function to cancel the refrigerant gas volume check (check performed during normal operation) when item is OFF ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
        Fan speed increment control Function to define how fast the air conditioning blower goes to target speed when first activating the air conditioning Normal 001:Slow,010:Normal,100:Fast Air Conditioning Amplifier Assembly

    2. Customizing using the Radio and Display Receiver Assembly.


      1. Turn the power switch on (IG).

      2. Enter the following menus: APPS / Setup / Vehicle / Vehicle customization / Climate settings.

      3. Select the setting by referring to the table below.

        Climate settings
        Display Default Content Setting ECU
        Efficient ventilation mode On In case of turning the air conditioning system on to cool the cabin down quickly, this function changes the mode automatically to recirculation air mode On or Off Air Conditioning Amplifier Assembly

  2. CUSTOMIZE CONTROL PANEL


    1. Customize switch response time


      1. Turn the power switch on (IG).

      2. Press the "Blower Up" switch and "DUAL" switch simultaneously for 3 seconds.

      3. A number is displayed on the screen. Press the "REAR DEF" switch to change the setting.

        Item Default Setting Switch Response Time ECU
        TEMP Switch Other Switches (Except "TEMP" Switch)
        Switch response time 05 01 0.04 seconds 0.06 seconds Integration Control and Panel Assembly
        02 0.04 seconds 0.08 seconds
        03 0.04 seconds 0.10 seconds
        04 0.04 seconds 0.12 seconds
        05 0.04 seconds 0.14 seconds

    2. Customize switch response sound


      1. Turn the power switch on (IG).

      2. Press the "AUTO" switch and "DUAL" switch simultaneously for 3 seconds.

      3. "ON" or "OFF" is displayed on the screen. Press the "REAR DEF" switch to change the setting.

        Item Default Setting Switch Response Sound ECU
        Switch Response Sound ON ON ON Integration Control and Panel Assembly
        OFF OFF

    3. Customize display popup


      1. Turn the power switch on (IG).

      2. Press the "DUAL" switch and "FAST ECO" switch simultaneously for 3 seconds.

      3. "ON" or "OFF" is displayed on the screen. Press the "REAR DEF" switch to change the setting.

        Item Default Setting Display Popup ECU
        Display Popup ON ON ON Integration Control and Panel Assembly
        OFF OFF

    4. Customize switch sensitivity level


      1. Turn the power switch on (IG).

      2. Press and hold the "REAR DEF" switch within 5 seconds after turning the power switch on (IG) and operate the dimmer switch as follows: OFF → TAIL → OFF → TAIL → OFF → TAIL.

      3. A number is displayed on the screen. Press the "REAR DEF" switch to change the setting.

        Item Default Setting Switch Sensitivity Level ECU
        Switch Sensitivity Level 01 01 Normal Integration Control and Panel Assembly
        02 High