PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. Resistance Inspection


      1. A01MGNKC02
        *a

        Component without harness connected

        (Quick Heater Assembly)

        According to the table below, measure the resistance between the terminals.

        Standard Resistance
        Tester Connection(Terminal Code) Switch Condition Specified Condition
        A-1(B) - B-1(E) Always Below 1 Ω
        A-2(B) - B-1(E) Always Below 1 Ω
        A-2(B) - C-1(E) Always Below 1 Ω
        A-3(B) - C-1(E) Always Below 1 Ω

        Tech Tips

        If the specified condition is not met, replace the quick heater assembly.