REAR SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH


    1. A01MH9KC03
      *a Protruding Part

      Install the rear seat 3 point type belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Make sure to install the floor anchor in the correct direction.

      • The anchor part of the rear seat inner 3 point type belt assembly LH must not overlap the protruding part.

  2. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH


    1. A01MH4IC03
      *a Protruding Part

      Install the rear seat 3 point type belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Make sure to install the floor anchor in the correct direction.

      • The anchor part of the rear seat inner 3 point type belt assembly RH must not overlap the protruding part.

  3. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

  4. INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side.