OCCUPANT DETECTION SENSOR INSPECTION

PROCEDURE


  1. INSPECT OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD WITH COVER)


    1. Check the resistance.


      1. A01MG5LC04
        *a

        Component without harness connected

        (Occupant Detection Sensor (Front Seat Cushion Pad with Cover))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 3 Front passenger seat occupied Below 100 Ω
        Front passenger seat not occupied 1 MΩ or higher

        If the result is not as specified, replace the occupant detection sensor (front seat cushion pad with cover (front passenger seat)).