SEAT BACK HEATER(for Rear Side) INSTALLATION

PROCEDURE


  1. INSTALL REAR SEATBACK HEATER (BENCH TYPE REAR SEATBACK COVER)


    1. Temporarily install the rear seatback heater (bench type rear seatback cover).

      Tech Tips


      • When installing the seat cover, refer to the hints to prevent wrinkles in the rear seatback heater (bench type rear seatback cover).

        Click here

      • In stitch:


        • As shown in the illustration, adjust the cover seam allowance portions so that they are in the same direction.

          A01MGCRN01
    2. A01MI1RN01

      Using hog ring pliers, securely install 22 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage or contaminate the rear seatback heater (bench type rear seatback cover).

      • A01MHN6C05
        *1 Hog Ring
        *a Hog Ring Pliers

        Align the centers of the straps with the center of the rear seatback pad so that wrinkles do not form, and securely fasten the hog rings as shown in the illustration.

    3. A01MICPN01

      Using hog ring pliers, securely install 40 new hog rings in the order shown in the illustration, and install the rear seatback heater (bench type rear seatback cover).

      Note


      • Be careful not to damage or contaminate the rear seatback heater (bench type rear seatback cover).

      • A01MHN6C06
        *1 Hog Ring
        *a Hog Ring Pliers

        Align the centers of the straps with the center of the rear seatback pad so that wrinkles do not form, and securely fasten the hog rings as shown in the illustration.

  2. INSTALL REAR SEAT HEADREST SUPPORT

    Click here

  3. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    Click here

  4. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. INSTALL REAR SEAT HEADREST ASSEMBLY

    Click here

  6. INSTALL REAR SEATBACK ASSEMBLY

    Click here